8-212 UNC Thread / Lifting Point
Yellow Point(YP)
Description

•Rotates through 360° and pivots 90°.

•Manufactured from alloy steel, quenched and tempered.

•Tested in accordance with EN1677-1.

•Load rated parts are 100% magnaflux crack detected.

•Individual forged parts and cap screw are traceable to Test Certification.

•Bolts are UNC thread.

•Proof tested to 2.5 times the WLL.

•Fatigue rated to 20,000 cycles at 1.5 times the WLL.

•All YOKE Lifting points meet or exceed all the requirements of ASME

 B30.26.

•Quick and simple assembly, just a tapped hole is required.

Download
(dwg、dxf、stp、step、igs、iges、pdf)
Specification

3D file download Item NO. Working
Load Limit
Thread version Dimensions                 Torque
in
N.W.
      M E TPI A B C D F G H S SW  I  J K    L    N      
    tonnes inch inch inch                                 Nm lbs
8-212-010 1 1/2 0.94 13UNC 1.30 1.48 1.73 0.53 3.9 2.24 1.42 5/16 3/4 1.74  3.49  1.49     1.62   1.22    100 1
8-212-015 1.5 5/8 1.14 11UNC 1.30 1.48 1.81 0.53 3.9 2.24 1.42 3/8 15/16 1.76  3.49  1.47     1.56   1.22    150 1.3
8-212-020 2.5 3/4 1.46 10UNC 1.97 2.12 2.16 0.65 5.58 3.22 1.69 1/2 1 1/8 2.9  5.23  2.07     2.77   1.93    200 2.9
8-212-025 2.5 7/8 1.46 9UNC 1.97 2.12 2.24 0.65 5.58 3.22 1.69 5/8 1 5/16 2.9  5.23  2.07     2.69   1.93    250 2.8
8-212-040 4 1 1.61 8UNC 1.91 2.13 2.34 0.65 5.62 3.22 1.73 5/8 1 1/2 2.87  5.26  2.09     2.63   1.77    400 4.3
8-212-050 5 1 1/4 2.11 7UNC 2.36 2.56 3.21 0.89 6.7 3.90 2.42 7/8 1 7/8 3.14  2.53     2.6   2.32    500 6.8
8-212-080 8 1 1/2 2.44 6UNC 3.03 3.35 4.01 1.04 8.85 4.88 3.07 1 2 1/4 4.42  8.04  3.15     3.8   2.72    800 12.9
8-212-150 15 1 3/4 2.6 5UNC 3.74 4.09 4.41 1.42 10.16 6.22 3.39 1 2 5/8 9.01  3.85     4.33   3.86    1500 24.5
8-212-200 20 2 2.8 4.5UNC 3.74 4.09 4.72 1.42 10.24 6.22 3.54 1 1/4 3 4.94  9.07  3.88     4.09   3.86    2000 27.2