振鋒企業論文獎 - 台灣金屬熱處理學會年會論文
年度
論文名稱
2009
以蜜胺實施固體滲氮的可行性研究
The Study of the Feasibility of Solid Nitriding with Melamine
深冷及碳化物噴覆處理對滲碳鋼耐磨行為之影響
Effect of Sub-zero treatment and Carbide Spray Coating on the Wear behaviour of Carburized steel
沃斯回火球墨鑄鐵之顯微組織與腐蝕行為之研究
雙相區沃斯回火球墨鑄鐵處理之韌性研究
Toughening of ADI Austenitized at Intercritical Region
時效處理對鐵-15錳-8鋁-1碳合金顯微結構與機械性質之影響
The Effects of Aging Treatments on the Microstructural Changes and Mechanical Properties of the Fe-15Mn-8Al-1C Alloy
UHS2000 彈簧鋼添加硼採感應熱處理之影響
The Effect on Boron addition of UHS2000 Spring Steel by Induction Heat Treatment.
Cu/Mg 比對Al-Zn-Mg-Cu 高強度鋁合金時效析出行為的影響
Effects of Cu/Mg Ratio on the Precipitation Behavior of Al-Zn-Mg-Cu Alloys.
熱處理對高純度鋁靶顯微組織及濺鍍特性之影響
Effect of Heat Treatment on Microstructure and Sputtering Properties of High Pure Aluminum Target.
純銅經等徑轉角擠型與低溫軋延後之退火行為研究
Annealing Behavior in Pure Copper Processed by Equal Channel Angular Extrusion and Cryo-Rolling
添加少量Ta及熱機處理對Fe-Mn-Si基形狀記憶合金性質影響之研究
Effect of slight tantalum addition and thermo-mechanical treatment on Fe–Mn–Si shape memory alloy
以機械研磨法添加石墨對改善 ZK60合金儲氫性質之研究
AZ80+2%Li 鎂合金熱機處理之研究
AZ80+2%Li A study of thermo-mechanical treatment on the AZ80+2%Li Magnesium alloy
退火及熱循環對鈜鎳鈀銅高溫形狀記憶合金相變態性質影響之研究
Annealing and thermal cycling effects on TiNiPdCu high temperature shape memory alloys
SM490A結構用鋼同質銲接之特性研究
鈦鉻釩系儲氫合金之循環吸放氫與抗毒化特性
The cyclic hydrogen absorption-desorption and anti-poisoning characteristics of (Ti0.4Cr0.6)1-XVX alloys
真空硬銲時間對WC-Co與KDA1工具鋼硬銲接合件特性之影響
Effect of Vacuum Brazing Time on the Properties of Vacuum Brazed WC/KDA1 Tool Steel Joint
加熱溫度對Bi-Ag/Bi2Te3 熱電接點組織影響
於胺基磺酸浴中電鍍鎳與電鍍鈷鍍層之高溫退火行為
Annealing Behavior of Nickel Electrodeposition and Cobalt Electrodeposition from Sulfamate Bath
EN介層厚度對ADI披覆CAD-TiN耐沖蝕行為之影響
Effect of Electroless Nickel Interlayer Thickness on Erosion Behavior of ADI Coated CAD-TiN
金屬之類鑽碳膜(DLC)表面冷電漿處理並固定肝素增進抗蝕性及血液適應性
超薄Ta-C-N 薄膜阻障層與銅製程整合特性探討
Ultrathin Ta-C-N films as a diffusion barrier for copper metallization
超薄(Ru-Ta)Si-C非經體擴散阻障層與銅製程整合特性研究
Ultrathin (Ru-Ta)Si-C amorphous films as a diffusion barrier for copper metallization
Mn:ZnO 透明導電氧化物與稀磁半導體薄膜之製備與性質
Preparation of the Manganese Zinc oxide transparent conductive thin film by chemical bath deposition
利用CO2反應氣體對電弧沉積Ti-C-O複合膜耐蝕性之影響
Effects of CO2 reactive gas on corrosion resistance of arc-deposited Ti-C-O composite coatings
鍍膜後熱處理對CrAlSiN薄膜微結構與機械性質之影響
Mechanical properties of the CrAlSiN and coatings by post-deposition Heat Treatments
鐵-4鋁-3鉻-6鎳-16錳-0.2碳合金相變化
Phase Transformation of the Fe-4Al-3Cr-6Ni-16Mn-0.2C Alloy
通電退火之電流密度對SUS304不銹鋼性質影響
Effect of Current density on Properties of SUS304 Stainless Steel by Current Annealing
高錳合金化球墨鑄鐵之沃斯回火製程及機械行為研究
Study on austempering processes and mechanical behaviors of high manganese alloyed ductile iron.
以純銅為焊料利用超高頻感應加熱硬焊不銹鋼線材與低碳鋼線材之研究
The Induction Brazing of Stainless Steel Wire and Low Carbon Steel Wire with Cu Filler Metal
時效熱處理對熱均壓718超合金顯微結構及機械性質之研究
合金元素對鎂鋰合金析出反應之影響
沃斯回火對含銅延性鑄鐵微結構及破裂韌性之影響
Austempering Effect on Microstructure and Fracture Toughness of Austemperd Ductile Iron containing Copper
熱儲存對Sn-Ag-Cu-xTiO2 機械特性之影響
Heat storage effect of mechanical properties of the Sn-Ag-Cu-xTiO2
添加矽對鎂鋰合金性質影響之研究
Effect of Mg-Li Alloys with Silicon Addition
氮氧化處理對AISI H13工具鋼熱熔損與腐蝕性質之研究
熱機處理對Fe-30Mn-6Si形狀記憶合金之影響
Effects of thermo-mechanical treatment on an Fe-30Mn-6Si shape memory alloy
SCM435 鋼材電解電漿處理實驗
Electrolytic plasma treatment of SCM435 steel
改進鐵基形狀記憶合金單向記憶性能之研究
A Study of Improving One-Way SME of Fe-based Shape Memory Alloys
含稀土元素之軟銲填料接合鎂合金與鋁合金研究
FeMnSi(Cr)形狀記憶合金添加微量稀土元素之研究
Effects of Slight RE Addition on an Fe-Mn-Si-Cr Shape Memory Alloy
2205含銀抗菌雙相不銹鋼高溫機械性質之研究
High temperature mechanical properties of antibacterial 2205 duplex stainless steel with 0.2wt% Ag
析出硬化型塑膠模具鋼的氮化組織及其耐腐蝕性
Surface Microstructure and Corrosion Resistance of Precipitated Hardened Plastic Mold Steel Treating by Gas Soft-nitriding
真空熱處理對麻田散鐵系不銹鋼磨耗行為之影響
Effect of Vacuum Heat Treatment on the Wear behavior of Stainless Plastic Mold Steels
退火處理與交互冷軋對ZK60之機械性質影響
Effect of Anneal Treatment and Cross Cold-Rolling on Mechanical Properties of ZK60
鈦-5鋁-1錫-1鉻-1鐵合金相變化
晶粒大小及顯微組織對ZK60鎂合金低溫類超塑性之研究
熱處理對CrTiAlZr多元金屬薄膜耐蝕性研究
Corrosion property study of CrTiAlZr multi-component coatings
氧化鈰對固體滲氮效果的影響
The Effect of Cerium Oxide on Solid Nitriding
不同電解液對LZ91鎂鋰合金雙極脈衝微弧氧化抗蝕性之影響
Different electrolyte to influence of LZ91 magnesium-lithium alloy prepared by bipolar pulsed micro-arc oxidation on the corrosion resistance
SCM 420 結構鋼滲碳之研究
以真空氣體氮化進行SNCM440與SACM645長型管件之內管硬化深度研究
The Hardening Depth of Long Pipe Shape Insides on the Materials of SNCM 440 and SACM 645 Processed by Vacuum Nitriding
添加WC或Cr3C2提升高速火燄熔射自熔合金塗層耐磨耗性質之研究
Study on enhanced Wear Behavior of HVOF Sprayed Self-Fluxing Coatings with and without WC and Cr3C2 additions
AZ61鎂鋁合金表面熱轉化處理之研究
微小零件之精確滲碳研究
The study of accurating heat treatment on miniature parts.
循環滲氫–後續固溶處理對Ti-15V-3Al-3Cr-3Sn之影響
Effects of Cyclic Hydrogenation–Subsequent Solution Treatment on the Hydrogen Distribution of Ti-15V-3Al-3Cr-3Sn Alloy
利用PVD-(Cr,Ti,Al)N鍍膜改善304不銹鋼耐候性之研究
Improvement on weatherability of AISI 304 stainless steel using PVD-(Cr,Ti,Al)N coatings
鎂合金單極微弧氧化法的極板距離對耐蝕性影響
The effect of cathode-to-anode distance of MAO coatings on AZ31 magnesium alloy prepared by uni-polar pulsed micro-arc oxidation on the corrosion resistance
溫度與應變速率對Sn-Ag基底銲點結合強度影響之研究
Effects of Temperature and Strain Rate on Adhesive Strength of Sn-Ag-based Lead Free Solder Joints
雷射表面重熔法對敏化之不銹鋼銲件修補研究
Study of Repairing the Sensitized Stainless Steel Weldments by Laser Surface Meting
δ 相析出對718鎳基超合金靜態再結晶之影響研究
Influence of δ Phase Formation on Static Recrystallization of Inconel 718
back
