振鋒企業論文獎 - 台灣金屬熱處理學會年會論文

97年度

論文名稱

2007

基複合材料擠製件的時效硬化特徵探討

 

Study of Aging Characteristics of Extrusion Component Materials of Aluminum Matrix Composite.

2007

血管支架用 TiNi 形狀記憶合金之多階段相變態研究

 

A Study on Multiple-stage Transformation in TiNi Shape Memory Alloys Using in Coronary Stent.

2007

超高強度Al-8.52Zn-1.75Mg-2.30Cu-0.12Zr-0.06Sc 鋁合金特性研究

 

The precipitation hardening of the ultra-high strength Al-8.52Zn-1.75 Mg-2.30Cu-0.13Zr-0.06Sc alloy.

2007

SAE 8620合金鋼應力腐蝕特性之研究

 

The stress corrosion behaviors of SAE 8620 alloy steel.

2007

奈米級碳化物在新型回火麻田散鐵中析出行為之研究

 

Study on the precipitation behavior of nano-sized carbide in the novel tempered martensitic steel.

2007

時效處理對鐵-15 錳-8 鋁-10 鈷-x 碳合金顯微結構與機械性質影響之研

 

Effects of Aging Treatments on the Microstructures and Mechanical Properties of Fe-15Mn-8Al-10Co-xC Alloys.

2007

退火處理對輕量化Mg-Li合金振動破壞性質影響探討

 

The effect of annealing on the vibration fracture properties of light weight Mg-Li alloys.

2007

異種不袗銲接之銲道γ→δ塊狀相變化

 

Massive Phase Transformation of weld metal from Austenite to Ferrite during Dissimilar Stainless Steels Welding.

2007

爐氣碳勢對碳工具鋼熱處理性質的影響

 

Massive Phase Transformation of weld metal from Austenite to Ferrite during Dissimilar Stainless Steels Welding

2007

錳元素含量對中高強度鋁合金熱處理製程的影響

 

Effects of Mn Content on the Heat Treatment Process of Medium-high Strength Aluminum Alloys

2007

熱處理對AZ31鎂合金雷射銲件應力腐蝕特性之研究

 

The Studies of Heat Treatment on stress corrosion cracking properties of AZ31 Magnesium Alloy Laser weldment

2007

Fe-Cr合金之高溫氧化行為研究

 

Oxidation behavior of Fe-Cr based alloys in hot air

2007

流旋形C-250麻時效鋼高溫機械性質與顯微組織

 

Medium to high temperature mechanical properties and microstructures of cold flow-formed C-250 maraging steels

2007

溫度對碳化鎢與SAE 1045中碳鋼硬銲接合件結構及特性之影響

 

Effect of Temperature on the Microstructure and Property of WC-Co /Carbon Steel Brazed Joints

2007

高韌性冷作工具鋼A2之研發

 

The Research and Development of A2 High Toughness Cold Work Tool Steel

2007

熱機處理對麻田散體不袗回火脆性及超音波特性之影響

 

TMT Effects on Temper Brittleness and Ultrasonic Characteristics of Martensitic Stainless Steel

2007

非鐵金屬之加工軟化與退火硬化

 

Mechamisms of Abnormal Work Softening and Anneal Hardening

2007

熱時效處理對Sn-Zn-Ag-0.01Al-xBi無鉛合金顯微結構之影響

 

Effect of aging treatment on the microstructures of the Sn-Zn-Ag-0.01Al-xBi lead-free alloys.

2007

時效處理 Sn-Zn-Ag-0.05Al-xBi 無鉛合金顯微結構之影響

 

Effect of aging treatment on the microstructures of the Sn-Zn-Ag-0.05Al-xBi lead-free alloys.

2007

變動實驗條件對鋁合金拉伸試驗之影響

 

The influences of the experimental conditions on the tensile test of alloyed aluminum specimens

2007

多次迴銲處理對添加過渡金屬元素Sn-Ag-Cu BGA錫球接點組織影響

 

The influence of multiple reflowing on the microstructure of the BGA joints with transition metal-containing Sn-Ag-Cu solders

2007

LZ101-0.3%Mn鎂鋰合金析出硬化之研究

 

A study of precipitation hardening of LZ101-0.3%Mn magnesium-lithium alloy

2007

循環滲氫與後續固溶處理對Ti-6Al-4V合金之氫濃度分布之影響

 

Effects of Cyclic Hydrogenation and Subsequent Solution Heat Treatment on the Hydrogen Distribution of Ti-6Al-4V Alloy

2007

奈米級碳化物在新型高強度低合金鋼中之熱穩定性研究

 

Study on the thermal stability characteristic of nano-sized carbide in the novel HSLA steel

2007

後熱處理對摩擦攪拌7075鋁合金特性之影響

 

The effects of post heat treatment in friction stir processed 7075 Al alloy

2007

AA6061經等徑轉角擠型及時效處理後之微觀組織及機械性質研究

 

Microstructure and mechanical properties of AA6061 processed by equal channel angular extrusion and age treatment

2007

機械合金法製備之(Mg2Ni)100-xAgx粉體於不同溫度之儲氫性質研究

 

Hydrogenation properties of mechanically alloyed (Mg2Ni)100-xAgx powders at various temperatures.

2007

冷電漿沉積有機膜於不鏽鋼表面以改善其抗蝕性並接枝感溫性水膠

 

Cold Plasma Deposition Organic Film on Stainless Steel to Improve Corrosion Resistant and Graft Thermal-Sensitive Hydrogels

2007

多元鎳磷鋁銅合金薄膜相變化與表面特性研究

 

Phase transformation and surface characterization of multicomponent Ni-P-Al-Cu alloy coating

2007

不袗鍍製銳鈦礦二氧化鈦的保固性

 

Anatase TiO2 Deposition on Stainless Steel and Its Protection Performance

2007

以新型微波輔助化學氣相沉積法成長不同旋度單壁碳奈米管

 

A novel MPCVD process to synthesize SWNTs with different chiralities

2007

加工參數對球墨鑄鐵放電合金化改質層特性之影響探討

 

Effect of Machining Parameter on Characteristics of Surface Modified Layer of Spheroidal Graphite Cast Iron by Electrical Discharge Alloying

2007

理蒸鍍鉻系鍍膜開發-從實驗室到產業應用

 

The development of PVD Cr-based coating- from laboratory study to industrial application

2007

利用非平衡磁控濺鍍法濺鍍(Ti, Zr ) N薄膜之研究

 

Study of (Ti, Zr)N multi-element coatings by using the unbalanced magnetron sputtering

2007

利用非平衡磁控濺鍍法濺鍍氮化鉻薄膜之研究

 

The study of deposited Cr N films on high speed steel by unbalanced magnetron DC sputtering

2007

導電膜氧化鋅鎵於可撓式基板之研究

 

Study of ZnO:Ga conducting oxide thin films deposited on flexible substrate.

2007

鈦金屬表面之非晶質與熱處理後生成銳鈦相TiO2奈米薄膜研究

 

Devitrification and thin film studies of ATO nanotubes.

2007

不同結構之不鏽鋼經網罩電漿處理之研究

 

The Study of Different Structure of Stainless Steel by Plasma Treatment with Active Screen.

2007

軟氮化對模具鋼NAK80蝕特性之影響

 

The effect of erosion character for NAK80 with soft-nitriding.

2007

鍍鋅鋼片之表面鍍鋅層中介金屬相之研究

 

Study on the intermetallic phases of coated Zn layer in the galvannealed steel.

2007

活化網罩電漿滲氮對不鏽鋼磨耗性質之研究

 

The wear properties of active screen plasma nitrided stainless steels.

2007

304不袗之 Stellite 6轉移式電漿電弧被覆層微觀組織特性探討

 

Microstructural Characterization of Plasma Transferred Arc Overlaying Stellite 6 Coatings on 304 Stainless Steel.

2007

利用Cr-N-O電弧鍍膜改善沃斯回火球墨鑄鐵耐蝕性之研究

 

Improvement on Corrosion Resistance of ADI by Cr-N-O Arc-coatings.

2007

陰極電弧沉積鉻基硬質薄膜之機械性質研究

 

The study of mechanical properties of Cr-based hard coatings by cathodic arc deposition process.

2007

陰極電弧沉積AlTiCrNCrN鍍膜對氮化鋼表面特性之影響

 

Effects of AlTiCrN/CrN Arc-coatings on Surface Characteristics of Nitrided Steel.

2007

熱處理對無電鍍鎳鍍膜之機械性質影響研究

 

The effect of heat treating on the mechanical properties of electroless nickel coating.


Copyright 2001 YOKE Industrial Corp.
All Rights Reserved Mar. 1 2001
Legal Notice

back