振鋒企業論文獎 - 台灣金屬熱處理學會年會論文

振鋒企業論文獎 - 台灣金屬熱處理學會年會論文
96年度	論文名稱
2006	6061 鋁合金在初時效下之衝剪特性
	The stamping behavior of an early-aged 6061 aluminum alloy.
2006	時效處理對鐵錳鋁鈷碳合金表面硬度與顯微結構之影響
2006	Inconel 713 LC 超合金熱均壓製程參數及特性之研究
2006	SAE 8620 合金鋼熱處理效應之研究
	Effects of heat treatment on SAE 8620 alloy steel
2006	Al-Zn-Mg-Sc-Zr 合金之析出硬化特性研究
	Characterization of Precipitate Hardening in an Al-Zn-Mg-Sc-Zr Alloy
2006	奈米級碳化物析出強化之高強度低合金鋼
	Nano carbide precipitation strengthening in a newly developed HSLA steel.
2006	Heat treatment induced orientation change of nanometer-sized interphase precipitated TiC in a Ti-bearing Steel
2006	以超深冷處理改善碳工具鋼的耐磨性研究
	Improving Wear Resistance of CarbonTool Steel by Cryogenic Treatment.
2006	Mg-4.5﹪Al-1.5﹪Zn 之顯微組織與機械性質研究
2006	銲後熱處理製程對AA7005 銲件機械性質之影響
	A Study for Postweld Heat Treatment on Mechanical Properties of AA7005Weldment.
2006	氮氣氛下時效參數對高矽沃斯田鐵系不銹鋼δ/σ/γ相變化之研究
	The Study of Aging Parameters on δ/σ/γ Phase Transformation in High Silicon Stainless Steels under Various Nitrogen Atmospheres.
2006	鉑銠合金熱電偶晶粒成長與使用壽命之研究
	Study of grain growth and life cycle of Platinum/ Rhodium alloy thermocouple.
2006	低碳鋼盤元線材球化率檢測方法之探討
	A Study of the Measurement Method of Spheroidizing Rate on Coil of Low Carbon Steel.
2006	鎳元素對沃斯回火球墨鑄鐵微結構及機械性質之影響
	Effects of nickel element on microstructure and mechanical properties of ADI.
2006	440C 麻田散體不鏽鋼經由超深冷處理之耐磨耗性提升之研究
	Wear Resistance Enhancement Study of 440C Martensitic Stainless Steel by Cryogenic Treatment.
2006	金屬之熱加工軟化及退火硬化
	Elevated Temperature Strain Softening and Anneal Hardening in Alloys.
2006	AISI D2 工具鋼經超深冷處理後其顯微組織以及機械性質之影響
	The effect of microstructure and the mechanical properties of AISI D2 tool steel by deep cryogenic treatment.
2006	電漿被覆NbC 顆粒在純鈦之冶金機制與SiO2 顆粒沖蝕行為
	Metallurgical Mechanism and SiO2 Erosion Behavior of Plasma Transferred Arc- overlayed NbC Powders on Pure Ti.
2006	轉移式電漿電弧被覆Stellite 合金於球墨鑄鐵之表面被覆層磨耗特性探討
	Wear Characteristics of Stellite Overlayer Melted on Spheroidal Graphite Cast Iron by Plasma Transferred Arc Processing.
2006	AZ91 鎂合金表面光觸媒處理研究
2006	Growth of Carbon Nanotube Field Emitters Using Anodic Aluminum Oxide as the Template
2006	Growth mechanism and properties of the well-aligned-carbon-coated Si nanocones by MPCVD
2006	Effect of Substrate Bias on Growth and Properties of Carbon Nanotubes Deposited under no Hydrogen Introduction by MPCVD
2006	不銹鋼之光觸媒抗菌表面處理
	Antimicrobial Photocatalytic Surface Treatment on Stainless Steel.
2006	鎂合金薄帶的電弧離子鍍氮化鈦裝飾用皮膜研究
	The Study of Decorative TiN Thin Film on the Ribbon of Magnesium Alloy by Arc Ion Plating.
2006	鎳基超合金沉積相穩定氧化鋯抗熱循環特性之研究
	Study on the Thermalcyclic Performance of YSZ Deposited Ni-base Superalloy.
2006	金屬傳動元件沉積氮化鉻之研究
	Study on Chromium Nitride Coated Transmission Component.
2006	N2 及H2 氣氛熱處理對氧化鋅摻雜氟化鎂薄膜光電特性之研究
2006	鎳鉻合金薄膜之退火熱處理製程等濺鍍參數研究
2006	斜向濺鍍鎳鉻合金薄膜之顯微結構與特性研究
	Sculpture microstructure and properties of thin Ni Cr films deposited by using glancing angle sputtering.
2006	利用低溫電漿對竹炭表面改質提升表面強度及固定鈦氧化物之其光滅菌研究
	Plasma Modified Bamboo Charcoal Surface For Improve Strength Immobilization of Oxide of Titanium And Anti bactericidal Effect.
2006	高磷無電鍍鎳厚度對7075-T6 鋁合金機械與腐蝕行為之影響
	Effects of high-P electroless nickel thickness on mechanical and corrosion behaviors of 7075-T6 Al-alloy.
2006	放電加工之表面裂紋敏感性研究
2006	材料表面硬度及沖砂顆粒尺寸對DC 11 工具鋼的沖蝕影響
	Influence of Material Surface Hardness and Particle Size on the Erosion of DC 11 Tool Steel.
2006	中碳合金鋼之雷射表面硬化處理
	Laser Surface Hardening of Medium Carbon Alloy Steels.
2006	銲接入熱量對Mg-Al 合金二氧化碳雷射銲件特性之影響 Influence ofWeld Heat Input on the Behavior of CO2 Laser Mg-Al Alloys Weldments
2006	17-4PH 麻田散體系析出硬化型不鏽鋼之低溫活化屏蔽電漿滲氮之研究
	Low temperature Active Screen Plasma Nitriding Study on the Martensitic Precipitation Hardening 17-4PH Stainless Steel.
2006	不銹鋼經活化網罩電漿滲氮之腐蝕性質之研究
	The corrosion properties of active screen plasma nitrided stainless steels.
2006	AISI S7工具鋼之滲碳研究
	A study of carburization of AISI S7 tool steel.
2006	評估316 不銹鋼實施不同溫度之電漿氮化處理所得之滲層對耐腐蝕性及耐磨耗性之研究
	Assessment of Corrosion and Wear Resistance Behavior on the Coated Layers of 316 Austenitic Stainless Steel Fabricated by Different Plasma Nitriding Temperatures.
2006	以流體床技術實施沃斯田鐵不鏽鋼氣體滲氮之研究
	Gas nitriding of austenitic stainless steel by fluidized technique

back